Solar Power How it Works

Solar Power How it Works Revealed

June 9th, 2010

In the present market several companies and corporations are selling installation kit of solar power system and its guidelines too. In way to save your precious money you can construct your own solar panel at home and the total expenditure to build it, will cost you not more than 200$. Below instruction and guidelines are for the solar power how it works and construction of solar panel at your home in simple and easy way.

Build Solar Panel Step no.1: The first thing you require to build a solar power system is pieces of copper. Make sure that the pieces of copper you are using is rust free and if find any rust on the surface of the piece properly clean it with sand paper. After cleaning it, cut the metal (copper) in rectangular or square shape, approximately 12 by 12 inches in size, from the metal sheet.

Build Solar Panel Step no.2: Put the piece of copper on the electric burner. Turn the knob of the burner ON and heat the piece of copper for more than half hour, keep heating it until the piece of copper convert into thick layer. This thick layer of piece of copper is known as cupric oxide.

Build Solar Panel Step no.3: Now make the thick layer of layer of copper (cupric oxide) get cool down. The time period of cool down of copper piece can be long but as soon as it get cool, few pieces of cupric oxide will start to peel off.

Build Solar Panel Step no.4: Place the matter of cool copper in water and rub it lightly to take off the small pieces of cupric oxide but be careful when you rub the cool copper don’t take off the red cupric which was produced when you were heating the piece of copper.

Build Solar Panel Step no.5: Get extra small piece of copper and cut that piece in equal size. Connect the both panel with the help of alligator clips on wide opened plastic bottle and cut off the upper part. Make sure these two panels don’t get touched with each other.

Build Solar Panel Step no.6: Now joint the connection of alligator clip with positive point of meter, after that connect the plate of cupric oxide on the negative point of meter.

Build Solar Panel Step no.7: Make a mixture of salt with hot water. Use the plenty amount of salt mixture that only cover the plates of copper, be careful when you are pouring the mixture of salt, the both alligator clips should remain dry and don’t touched with each other.

Build Solar Panel Step no.8: Now your homemade solar panel is ready for working, put your solar panel into direct exposure of sunlight and get avail the facility of self made electrical producing system.

Now you know solar power how it works and above mentioned guidelines and instructions for constructing the solar power system on small scale. By practicing and generating new ideas in your mind related to solar power technology you build the solar panel on large scale. For better performance and result place your solar panel on the roof in direct exposure of sunlight or if it is not possible put it your garden and make sure it is not place under the shadow.

Tags: Solar Power How it Works
Posted in Categories: Uncategorized | No Comments »

Make Solar Power At Home

June 20th, 2010

It is very useful o constructing your solar panel at home. By these below mentioned guides you will get to know how you can build your solar panel by following 5 easy steps.

The first and main thing you need to do is buy a guideline. You can also get a free proper guideline from Internet. Make sure the guideline you are using is easy and simple to follow and the instructions mentioned in that guideline should be in detail.

Purchase solar batteries for solar panel. You can purchase those cells in brand new condition or in used condition and easy way to own it from Internet by paying very low prices. These cells play vital role in constructing and performance of solar panel so it will good for you to avoid defective or broken cells and purchase a brand new solar cells.

Attach all the solar cells with each other. For constructing a normal and average solar panel you need nearly around 80 to 90 solar cells, make the wires of cells soldered with each other in a way to generate approx 100 watts of electricity power. To avoid any harm ness protect those cells by wrapping it with sheets of plywood and weather shield. After that place glass on the upper side of the panel’s mechanism and make it sealed by using silicone.

Set up the solar panel when the mechanism of solar panel is properly finales, the most important thing for solar panel is placing it in direction from where the solar panel system is exposed into direct sunlight. For better performance place it on the roof and if it is not possible then put it in garden where sunlight directly falls on the solar panel. If any person manages to construct a mechanism, which can rotates the solar panel in the directions of sunlight in the daytime then this rotating solar panel is really functional and effective for that person.

Final and last thing you need to do after the installation and placing of the panel is to join the connection of the panel to main power system of the house. The connection of solar panel to cells is with regulating device known as charge regulator. Also install an inventor and make it connect with output of the battery. The connection of inventor with battery will allow conversion of DC output to AC output of the battery, which will stabilize the electrical system of your house.

This is all knowledge and guide to construct a solar panel system in a simple and easy way. Constructing your own solar panel system is quite beneficial and useful for you and your family. Once you build a solar panel system you can save lot of money which you pay for electricity bills. Several states pay an amount of money to you, if you are generating more power beyond your usage. Generating electrical power by using fossil fuels is very expensive now days. Now this is perfect time to construct a solar panel system and save your precious money.

Tags: Solar Power, Solar Power How it Works
Posted in Categories: Uncategorized | 1 Comment »

Build your own Solar Panel

June 9th, 2010

Are you interested to build your own solar panel? The necessary plan of solar power panel is that it observes energy from the rays of the sun and after that it converts solar power into electric power as electricity. It has many benefits especially if you have your own solar energy panels at our residence. Solar energy means extra ordinary energy or power and it is also known as renewable energy. While, it doesn’t ask for the fuel, oil or any other lubricant to start with, except that the sunlight. In the natural atmosphere, it does not release any harmful elements. Solar panel gizmos are specially inexpensive and low in maintenance. Operating expenses are just about a single time as you initially produce and install it. Later, there will be a major benefit that electricity will run without cost that means absolutely free. Thus, the toll is going to recovered immediately.

There are copious companies in the market selling solar panel installation kits and directions. Basically, your everyday expenditure will reach above $50 and will not get above $200. Following are the stuff on how to build your own solar panel:

Clean and clear the piece of copper that you are planning to utilize. To remove any kind of marks of decay and rust, you will make use of a sand paper. Utilizing sheers of sheet metal, cut out a piece of copper metal with dimensions about 12 x 12 inches square or rectangular size.

Amend the copper metal piece by placing it on electric burner. After that, turn on the burner in “Cook” mode and leave that copper stuff either for one hour plus thirty minutes plus more or until the metal piece creates a wide layer of black cupric oxide.

Place the metal piece of copper on sideways and the cover of black cupric oxide has produced by holding out once to cool. For various coppers, the cooling time period may be longer or more rapidly. A few particles of oxide will commence to flake off when it cools.

Slowly rub the cooled metal piece of the copper beneath running water to take out the bits of cupric oxide. Be gentle, and also be careful, avoid taking out the red cupric oxide that was formed in the high temperature of the copper.

Take an extra additional small piece of copper and reshape it by cutting roughly to equal size. By means of alligator clips, join the two panels to a plastic bottle or broad mouth glass, with the higher half cut away. Just make sure about that both panels aren’t touching to each others.

To the positive terminal of the meter, connect the cable or lead of the alligator clips. And to the negative terminal of the meter you will have to connect the cupric oxide plate with it.

Arrange hot top water and dissolve salt in it. You would make enough amount of the salt solution that the hardly cover up the base level of the plates of copper, to make sure about alligator clips is still remaining untouched and dry.

The newly build solar panel is set now. Begin first experiment by placing the solar panel underneath the sunlight and see as working superbly and also the gauge jump.

It is optional to begin with a small solar panel. Of course! You can make much better and large size of solar panels when you have learnt a lot and got more talent and experience of building solar power panels. You will be full of flair to make the same. Normally, a better place to situate your solar panel is that the straight and direct appearance of sunlight that you have to use the most amount of it to perform better action. Well, it can be locate on your backyard. Give it a blast by yourself and save lots of even thousand of money of your electricity bills.

Tags: Solar panel, Solar Power How it Works
Posted in Categories: Uncategorized | 5 Comments »